Decorate your world with vibrant and stylish colors through a wide selection of pointings, named Grout Guard by Khadim Mortars. This waterproof grouting will provide a seal to your joints giving it security from dampness, mold, or fungus. Its ease of use means that you can take control of your construction.

Installation Instructions

How to Apply Khadim Mortars’ Grout Guard

  • 01
    Before applying Khadim Mortar’s Grout Guard, you should clear the place. Remove all types of dirt, sand, water, or oil from the surface
  • 02
    Take the whole packet of 1 KG Grout Guard in a pot. Mix 330 mL of water with the Grout Guard step by step.
  • 03
    Mix it well so that the entire mixture becomes a homogeneous mixture and there are no solid grains left inside it. Otherwise, it will start to become solid.
  • 04
    Use the trowel to enter the grouting inside the open spaces between tiles.
  • 05
    Use a wet sponge to remove the grouting stains on the tiles again and again. Repeat this process until all the gaps are filled up between tiles.
  • 06
    Wait for 4-5 hours for the grouting to set properly. Then examine if there is any part left anywhere to be closed.
  • 07
    You need to wait a minimum of two (2) days for the grouting to set and become solid perfectly. After that, people can walk over it.
  • 08
    You should not use any kind of acidic substance to clean grouting.

Technical Data

Property Value
Density 1.07 kg/liter approx
Pot Life 1 hrs approx
Adjustability 15 minutes approx
Setting Time Approx 3 day
Full Strength Approx 28 days
Compressive Strength 16 to 18 N/mm2

Frequently Asked Questions

Grout Guard from Khadim Mortars is a range of grout sealer from Khadim Mortars. They come in attractive and vibrant colors to turn your space into an artistic endeavour.

The R&D team of Khadim Mortars has developed many colours for grouting and tile pointing. You can find colours like milky white, off white, berry red, baby pink, heather purple in the range of Grout Guard from Khadim Mortars.

You need grouting or grout sealer to save your tiles, claddings, or natural stones from dampness, fungus and moulds. Otherwise water may enter the gaps and harm the mortar.

  • 1. Before applying Khadim Mortar’s Grout Guard, you should clear the place. Remove all types of dirt, sand, water or oil from the surface.
  • 2. Take the whole packet of 1 KG Grout Guard in a pot. Mix 330 mL of water with the Grout Guard step by step. Mix it well so that the entire mixture becomes a homogeneous mixture and there are no solid grains left inside it. Otherwise, it will start to become solid.
  • 3. Use the trowel to enter the grouting inside the open spaces between tiles. Use a wet sponge to remove the grouting stains on the tiles again and again. Repeat this process until all the gaps are filled up between tiles.
  • 4. Wait for 4-5 hours for the grouting to set properly. Then examine if there is any part left anywhere to be closed. You need to wait a minimum of two (2) days for the grouting to set and become solid perfectly. After that, people can be allowed to walk over it.

Yes, all grouting from the Grout Guard range in Khadim Mortars are waterproof.

You can use regular tile cleaners for tile and grout cleaning. But do not use any kind of acidic substance products for grout cleaning. It will harm the product.